domuk/OpenStickerMakerStudio
Watch
1
0
Fork
You've already forked OpenStickerMakerStudio
 0
Code Issues Pull requests Projects Releases 6 Packages Wiki Activity Actions
6 releases 6 tags
  • v0.7.0 23ec163020

    OSM Studio 0.7.0 Pre-release

    domuk released this 2026-11-02 19:59:57 +00:00 | 0 commits to main since this release

    Pre-release. Tested with the built-in simulators and in the browser, not yet on real printers. Try new settings on a spare sheet or a short label first.

    Made with AI: this project was built with the help of AI. Check results before relying on them.
    Independent open-source project, not affiliated with PixCut, Liene, Cricut or Brother.

    New in 0.7.0

    Label printers (Brother P-touch)

    • Connect over USB through the system's own USB printer driver, with no driver change, in the desktop app on Windows and Linux.
      • It reaches a P-touch held by Brother's Windows driver through Windows' usbprint, or by Linux's usblp.
      • It reads the loaded tape and any problem, and sets the label to the loaded tape.
      • It follows each label as it prints: printing, cooling down, printed, or the printer's error.
      • On Linux, your user needs to be in the lp group.
    • Test printing now has four buttons:
      • Read printer status (new). It prints nothing.
      • Print over the USB driver (with progress) (new).
      • Installed printer, raw data.
      • Installed printer, driver. On Windows it now prints on the driver's own paper size for the tape.

    Stickers

    • Border: goes from −3 to 10 mm in 0.1 mm steps. A negative border cuts inside the artwork, so there's no white edge.
    • Die cut:
      • new Cut length and Bridge settings
      • the default bridge is now 0.5 mm, so stickers stay in the sheet
      • outlines are cut top to bottom in stretches
      • a warning about cutting into the strip
    • Design card: an always-visible Cut group holds Cut shape, Border and Cut style. Image and Outline fine-tuning fold away.
    • Right panel: Cutting, Alignment and Export fold away and start closed. Print stays open.
    • Paper:
      • The paper code the printer reports is the size the last job asked for, not what's in the tray.
      • The "Unknown paper (possibly clear sticker sheet)" guess and the wrong-paper warning are gone.
      • The printer still stops with an alert if the wrong paper is loaded.

    Fixed

    • Save did nothing in the desktop app on a new project. It now asks for the name in its own dialog.

    MCP

    • set_settings takes perf_dash_mm and perf_gap_mm.
    • border_mm goes down to −3.
    • tape_test_print routes are status, sysusb, raw and driver.

    Downloads

    File For
    OSM-Studio-0.7.0-portable.exe Windows — one file, nothing to install
    OSM-Studio-0.7.0-win.zip Windows — unzip and run OSM-Studio.exe (best for MCP / Amazon Quick)
    OSM-Studio-0.7.0.AppImage Linux — chmod +x, then run (add --no-sandbox if it closes straight away)

    The Windows builds aren't code-signed, so SmartScreen may warn on first run.

    Checksums (SHA-256)

    93e07e4e14f04b27dcf4fd35122a31f1682de700e30f6d6a4ab7aebab960dcf9  OSM-Studio-0.7.0-portable.exe
03617fae29664032f8a734cd415d2371a6d03247bcc30537964214d01d0356f5  OSM-Studio-0.7.0-win.zip
e2f98629b2d2aa0f005294a59f8a0c08f276a92e22ca7317ccc985ec9bba2a40  OSM-Studio-0.7.0.AppImage
    Downloads