domuk/OpenStickerMakerStudio
Watch
1
0
Fork
You've already forked OpenStickerMakerStudio
 0
Code Issues Pull requests Projects Releases 6 Packages Wiki Activity Actions
6 releases 6 tags
  • v0.7.0 23ec163020

    OSM Studio 0.7.0 Pre-release

    domuk released this 2026-11-02 19:59:57 +00:00 | 0 commits to main since this release

    Pre-release. Tested with the built-in simulators and in the browser, not yet on real printers. Try new settings on a spare sheet or a short label first.

    Made with AI: this project was built with the help of AI. Check results before relying on them.
    Independent open-source project, not affiliated with PixCut, Liene, Cricut or Brother.

    New in 0.7.0

    Label printers (Brother P-touch)

    • Connect over USB through the system's own USB printer driver, with no driver change, in the desktop app on Windows and Linux.
      • It reaches a P-touch held by Brother's Windows driver through Windows' usbprint, or by Linux's usblp.
      • It reads the loaded tape and any problem, and sets the label to the loaded tape.
      • It follows each label as it prints: printing, cooling down, printed, or the printer's error.
      • On Linux, your user needs to be in the lp group.
    • Test printing now has four buttons:
      • Read printer status (new). It prints nothing.
      • Print over the USB driver (with progress) (new).
      • Installed printer, raw data.
      • Installed printer, driver. On Windows it now prints on the driver's own paper size for the tape.

    Stickers

    • Border: goes from −3 to 10 mm in 0.1 mm steps. A negative border cuts inside the artwork, so there's no white edge.
    • Die cut:
      • new Cut length and Bridge settings
      • the default bridge is now 0.5 mm, so stickers stay in the sheet
      • outlines are cut top to bottom in stretches
      • a warning about cutting into the strip
    • Design card: an always-visible Cut group holds Cut shape, Border and Cut style. Image and Outline fine-tuning fold away.
    • Right panel: Cutting, Alignment and Export fold away and start closed. Print stays open.
    • Paper:
      • The paper code the printer reports is the size the last job asked for, not what's in the tray.
      • The "Unknown paper (possibly clear sticker sheet)" guess and the wrong-paper warning are gone.
      • The printer still stops with an alert if the wrong paper is loaded.

    Fixed

    • Save did nothing in the desktop app on a new project. It now asks for the name in its own dialog.

    MCP

    • set_settings takes perf_dash_mm and perf_gap_mm.
    • border_mm goes down to −3.
    • tape_test_print routes are status, sysusb, raw and driver.

    Downloads

    File For
    OSM-Studio-0.7.0-portable.exe Windows — one file, nothing to install
    OSM-Studio-0.7.0-win.zip Windows — unzip and run OSM-Studio.exe (best for MCP / Amazon Quick)
    OSM-Studio-0.7.0.AppImage Linux — chmod +x, then run (add --no-sandbox if it closes straight away)

    The Windows builds aren't code-signed, so SmartScreen may warn on first run.

    Checksums (SHA-256)

    93e07e4e14f04b27dcf4fd35122a31f1682de700e30f6d6a4ab7aebab960dcf9  OSM-Studio-0.7.0-portable.exe
03617fae29664032f8a734cd415d2371a6d03247bcc30537964214d01d0356f5  OSM-Studio-0.7.0-win.zip
e2f98629b2d2aa0f005294a59f8a0c08f276a92e22ca7317ccc985ec9bba2a40  OSM-Studio-0.7.0.AppImage
    Downloads
  • v0.6.1 7db818b92e

    OpenStickerMaker Studio 0.6.1 Pre-release

    domuk released this 2026-11-02 17:11:44 +00:00 | 1 commits to main since this release

    Pre-release. Tested with the built-in simulators and on Linux, not yet on real printers.

    Made with AI: this project was built with the help of AI. Check results before relying on them.
    Independent open-source project, not affiliated with PixCut, Liene, Cricut or Brother.

    New in 0.6.1

    • Test printing (Printers → Label printer → Test printing): one button per way of printing, each printing a small test label:

      1. Direct USB
      2. Installed printer, raw data: OSM Studio's own printer data passed through the installed printer (e.g. Brother PT-P900W) untouched. There's no driver change, and it's the one to try first on Windows with Brother's driver installed.
      3. Installed printer, driver: the label as an image, printed by the printer's driver without a dialog.
      4. Wi-Fi
      5. Print dialog
      6. Save raw file

      Each result is listed and goes into Copy report.

    • Label printer model: the label printer card no longer names a model you may not have, and Check printers sets the model to the one it finds plugged in.

    • MCP: tape_test_print.

    Downloads

    File For
    OSM-Studio-0.6.1-portable.exe Windows — one file, nothing to install
    OSM-Studio-0.6.1-win.zip Windows — unzip and run OSM-Studio.exe (best for MCP / Amazon Quick)
    OSM-Studio-0.6.1.AppImage Linux — chmod +x, then run (add --no-sandbox if it closes straight away)

    The Windows builds aren't code-signed, so SmartScreen may warn on first run.

    Checksums (SHA-256)

    68b4663d98c60537d8d9e111ab06f4211baacf1b9c203f3db38b6b07d3786af7  OSM-Studio-0.6.1-portable.exe
c9061f8b9ce4ba44f23a57c74717433e781f24550c435e4d3fbc383e53875d91  OSM-Studio-0.6.1-win.zip
028740c147b464d3971d657da826745a1f56333fd12e65ca84a2e9eaad35240b  OSM-Studio-0.6.1.AppImage
    Downloads
  • v0.6.0 a79970d4e7

    OpenStickerMaker Studio 0.6.0 Pre-release

    domuk released this 2026-11-02 16:39:47 +00:00 | 2 commits to main since this release

    Pre-release. Tested with the built-in simulators and on Linux, not yet on real printers. Try new settings on a spare sheet or a short label first.

    Made with AI: this project was built with the help of AI. Check results before relying on them.
    Independent open-source project, not affiliated with PixCut, Liene, Cricut or Brother.

    New in 0.6.0

    • Check printers (in Printers). It also runs by itself when Connect over USB finds nothing.
      • Lists every sticker and Brother printer plugged in, and explains what's in the way, with the fix:
        • Windows' printer driver holding a P-touch
        • no WinUSB driver
        • no permission, or the usblp driver, on Linux
        • an unsupported model
        • a Wi-Fi printer that doesn't answer
      • The desktop app also reads the system's own device list and its installed printers.
      • Copy report gives a text version to send.
    • Label printer detection: label printers are recognised by USB id or by the model name they report, and their USB channels are read from the printer.
    • Test connection for the Wi-Fi printer address (desktop app).
    • One Printers button (top right) for connecting and managing all printers.
    • Several sticker printers at once:
      • Rename them and pick a default.
      • Print all can share the sheets between them, printing in parallel with each printer's own pressures.
    • Next sheet loaded button between sheets.
    • Demo printers removed.
    • MCP: check_printers, list_printers, select_printer, rename_printer, disconnect_printer; print takes printer and share.

    PT-P900W on Windows: if Check printers says Windows' printer driver is using it, use Print with system dialog or Wi-Fi printing, or switch it to WinUSB for direct USB. See Tape labels.

    Downloads

    File For
    OSM-Studio-0.6.0-portable.exe Windows — one file, nothing to install
    OSM-Studio-0.6.0-win.zip Windows — unzip and run OSM-Studio.exe (best for MCP / Amazon Quick)
    OSM-Studio-0.6.0.AppImage Linux — chmod +x, then run (add --no-sandbox if it closes straight away)

    The Windows builds aren't code-signed, so SmartScreen may warn on first run.

    Checksums (SHA-256)

    4cdbe7cda07f179c98a1201898fcdd0f54f242a31f0feb8d9101a7bcb2490d85  OSM-Studio-0.6.0-portable.exe
31965129ecdc66ad8b6da90a7e1a345aedc31d13729b57d1db48c9dc54c3f19c  OSM-Studio-0.6.0-win.zip
b980db59aa07277c07bed4e721dda0dd9084b969014e9334314a50a74b9fa07c  OSM-Studio-0.6.0.AppImage
    Downloads
  • v0.5.0 243e80571d

    OpenStickerMaker Studio 0.5.0 Pre-release

    domuk released this 2026-11-02 15:42:40 +00:00 | 3 commits to main since this release

    Pre-release. Tested against the built-in printer simulators, not yet on real printers. Try new settings on a spare sheet or a short label first.

    Made with AI: this project was built with the help of AI. Check results before relying on them.
    Independent open-source project, not affiliated with PixCut, Liene, Cricut or Brother.

    New in 0.5.0

    • Tape labels for Brother P-touch printers. Choose Tape label · Brother P-touch next to the sheet sizes.
      • PT-D610BT (TZe 3.5–24 mm, 180 dpi)
      • PT-P900 / PT-P900W (TZe up to 36 mm, 360 dpi or 720 dpi high resolution, half cut)
      • PT-P950NW is included but untested
    • What a label can hold:
      • Text, images and spaces
      • 111 barcode types, including QR, Code 128, EAN / UPC, Code 39, DataMatrix, PDF417 and GS1
      • Stacked layouts, such as a barcode under its text, with position and alignment options
    • Batches: one label per line of a list, or numbered labels, using {value}
    • Ways to print:
      • Direct USB
      • The system print dialog, through Brother or CUPS drivers
      • A raw .bin print file
      • A PNG image
      • Wi-Fi printing to the PT-P900W from the desktop app
    • Linux udev rules for the Brother printers
    • MCP: set_mode and the tape_* tools
    • Fixed: 2D barcodes are always square

    See Tape labels for setup, including the Windows USB driver note.

    Downloads

    File For
    OSM-Studio-0.5.0-portable.exe Windows — one file, nothing to install
    OSM-Studio-0.5.0-win.zip Windows — unzip and run OSM-Studio.exe (best for MCP / Amazon Quick)
    OSM-Studio-0.5.0.AppImage Linux — chmod +x, then run (add --no-sandbox if it closes straight away)

    The Windows builds aren't code-signed, so SmartScreen may warn on first run. See the README and user guide.

    Checksums (SHA-256)

    b972f81e6b72c485206b6c8f5fc62df7c720f5e4ce831ec6cb0159c892fc4f98  OSM-Studio-0.5.0-portable.exe
a9a3ee30defbd90446c95ae1e3550c4965b10df772b18ddf525360f947bd8409  OSM-Studio-0.5.0-win.zip
1f1b5c076c1a7a2cc442f459dbf4123686a1973bf55539cf8d294c9daaca13a5  OSM-Studio-0.5.0.AppImage
    Downloads
  • v0.4.0 71672a1c67

    OpenStickerMaker Studio 0.4.0 Pre-release

    domuk released this 2026-11-01 23:06:50 +00:00 | 7 commits to main since this release

    Pre-release. Tested against the built-in printer simulator, not yet on a real PixCut S1 or Cricut StickerPix. Try new settings on a spare sheet first.

    Made with AI: this project was built with the help of AI. Check results before relying on them.
    Independent open-source project, not affiliated with PixCut, Liene or Cricut.

    New in 0.4.0

    • Recommended pressures on the sliders — 42 for peel-off stickers, 53 for cutting them out — with Use recommended; pressures and alignment are remembered for each printer
    • Alignment check sheet and cut-offset correction (applied by OSM Studio; the printer's own calibration isn't changed)
    • Printer details in the status card: model, firmware, loaded paper — and a warning if the paper doesn't match the job
    • Resume printer, the printer's job list, auto power-off
    • Job-finished notifications from the printer in the log
    • Warning before printing very detailed cut lines
    • Cricut StickerPix Print+Cut shown by the name the printer reports (same printer family; untested)
    • New MCP tools: printer_info, resume_printer, printer_jobs, set_auto_off, alignment_check (31 in total)
    • Docs credit the PixCut-App protocol notes as a reference

    Downloads

    File For
    OSM-Studio-0.4.0-portable.exe Windows — one file, nothing to install
    OSM-Studio-0.4.0-win.zip Windows — unzip and run OSM-Studio.exe (best for MCP / Amazon Quick)
    OSM-Studio-0.4.0.AppImage Linux — chmod +x, then run (add --no-sandbox if it closes straight away)

    The Windows builds aren't code-signed, so SmartScreen may warn on first run. See the README and user guide.

    Checksums (SHA-256)

    355be160dfcf95293e13e8b6643d0a25516ecd3349bc266e57a8b161734262c4  OSM-Studio-0.4.0-portable.exe
2f7379ab676641678a13e87ecd957ec7a3097e2bd74beacb88784d44d16af28a  OSM-Studio-0.4.0-win.zip
3d924a2ba9d7df93bb9c496af10382feb50e426698ce1093457d0dbbf9b6da3b  OSM-Studio-0.4.0.AppImage
    Downloads
  • v0.3.0 5882ae2559

    OpenStickerMaker Studio 0.3.0 Pre-release

    domuk released this 2026-11-01 22:32:51 +00:00 | 8 commits to main since this release

    First public release — pre-release. Everything has been tested against the built-in printer simulator, but not yet on a real PixCut S1. Try new settings on a spare sheet first.

    Made with AI: this project was built with the help of AI. Check results before relying on them.
    Independent open-source project, not affiliated with PixCut.

    Downloads

    File For
    OSM-Studio-0.3.0-portable.exe Windows — one file, nothing to install
    OSM-Studio-0.3.0-win.zip Windows — unzip and run OSM-Studio.exe (best for MCP / Amazon Quick)
    OSM-Studio-0.3.0.AppImage Linux — chmod +x, then run (add --no-sandbox if it closes straight away)

    The Windows builds aren't code-signed, so SmartScreen may warn on first run. The web app is the web/ folder of the source — see docs/web-app.md.

    What's in it

    • Sticker sheet layout with shape nesting, Fill, Fill gaps, multi-sheet jobs and a sheet cost counter
    • Cut lines that follow the artwork, or rounded rectangle / rectangle / circle
    • Kiss cut and die cut (perforated) with optional peel tab; test cut
    • Background removal: plain colour, or a local AI cut-out (bundled, works offline)
    • Split an image of several stickers into separate designs
    • Text stickers and name lists, optionally printed onto a design
    • Rotate, mirror, trim, background fill; undo / redo; duplicate; paste; dpi warnings
    • Projects with a Recent list and optional stored print files for identical reprints
    • USB printing with plain-language printer messages; demo printer; JPG / PLT / SVG export
    • MCP server (HTTP and --mcp-stdio) with 26 tools; agents can only print when allowed in the app

    Start with the README and the user guide.

    Checksums (SHA-256)

    f49c42527c8288436d4470e62f03c0bea7aaf83d06861d91125d0e32f7591bfa  OSM-Studio-0.3.0-portable.exe
efbf0a46f950230fcf0da34c5429e1949da83c0895ea82a11f28f163f63527a4  OSM-Studio-0.3.0-win.zip
7e33d76479473d6e6cf5b9078305ff43e74e91ac51637a76a164449c1e637a0a  OSM-Studio-0.3.0.AppImage
    Downloads